|
|
|
  In-Building Wireless Amplifier Systems. More...
Requires No Physical Connection to Your Phone – It's Wireless
Transmits and receives an improved wireless signal inside your home or building and requires no physical connection to your phone.
- Requires no physical cable connection to your phone or cellular data card
- The system can be used by multiple phones and cellular data cards
- Works with all cell phone and cellular data card models
- A little more expensive than a direct connection amplifier
- Inside signal range may vary with signal strength
- Must have an outside antenna and an inside antenna
Each In-Building Wireless Amplifier System contains an amplifier and a power supply that plugs into a standard 120-volt wall outlet. You will also need at least one inside and one outside antenna and at least two lengths of coaxial cable to connect each antenna to the amplifier.
Antenna Options for your In-Building Amplifier System.
 SignalBoostTM DB Pro Amplifier Kit. More...
Perfect for the Whole Home
Plug-and-play kit boosts cellular signal throughout the home.
- Significantly improves voice and data quality
- Works wirelessly with multiple cell phones and data cards simultaneously
- Receives and transmits better than your cell phone alone
- Designed for use with standard TV cable common in many homes
- Extends cell phone battery life
- Cell site friendly technology
- FCC and Industry Canada type accepted
 SignalBoostTM DT Desktop Amplifier System. More...
Perfect for Any Room in a Home or Office
Plug-and-play kit boosts cellular signal in a single room.
- Wireless – no physical connection to cell phone or data card
- Amplifier features built-in inside antenna
- Outside antenna may be mounted outdoors on a pole or wall, or indoors on a window
- Supports multiple cell phones and data cards simultaneously
- Dual-Band: 800 and 1900 MHz
Direct Connection Amplifier System
Connects Directly into Your Phone With an Adapter
Puts the improved signal directly into your cell phone or cellular data card through a coaxial cable and adapter and gives you maximum signal performance for rural or remote locations.
- Requires a physical cable connection to your phone or cellular data card
- No signal loss because of the direct connection
- Best performance in rural or remote locations
- Can be used in buildings
- Adapters available for most phone and cellular data card models
- Must have an external antenna
Each Direct Connection Amplifier System contains an amplifier, a 6-foot coaxial extension cable that connects to an external antenna adapter (not included), and a power cable that plugs into a 12-volt cigarette lighter adapter. You will also need at least one outside antenna and at least one length of coaxial cable to connect the antenna to the amplifier.
|
| |
|
| | | Florida License # EF20000775 Also Licensed Low Voltage Unrestricted in GA, NC, ME, NH & Mass. | |
© Copyright All Rights Reserved
Site Design and Programming by: Exploritech, Inc. | Recommended by:  |
|
|
